Search

    • 0

    roller shutters - adaptive, external

    Construction

    Roller shutters intended mainly for buildings where windows have already been installed or where the use of other systems is inconvenient for certain reasons. They are built of an aluminum roller shutter box on aluminum rails fixed to the wall or window frame.

    Adaptive roller shutters are based on a roller shutter box made of aluminum, mounted on aluminum rails, usually attached to the wall or window frame. Service access to the inside of the box is provided by a movable inspection flap, always located outside the room. The roller shutter box is not insulated with a thermal insert and is invisible from inside the room.


    The roller shutter's armour is visible from the outside with the concave part inversely as in the case of overlapping roller shutters (the exception is the RAS version with the version of inverted installation to the recess).


    The roller blinds are available both in the version without and with a mosquito net (in the version with a mosquito net it should be remembered that it occupies a significant part of the box, reducing the effective height of the curtain of the armouring).


    RAK/E - adaptive shutters

    It is a variant of adaptive roller shutters equipped with a straight inspection flap, opening from the outside from the bottom of the box and an external flush-mounted strip, giving the possibility of plastering the box from the outside from the front, so that the box becomes invisible.

    Construction

    The RAK/E variant is available in four heights of 137 mm, 165 mm, 180 mm and 205 mm, of which the boxes in heights 165 mm, 180 mm and 205 mm are also available with a roller mosquito net.

    • Adaptive roller shutter system designed for installation.
    • The whole construction is made of aluminum (box, sides, rails).
    • Flat revision from the bottom of the box.
    • Wide range of RAL colors invisible parts of the box.
    • Available in mahogany veneer (05), golden oak (23), nut (27), dark oak (06).
    • Available box sizes: 137, 165, 180, 205 mm.
    • Possibility to use an integrated mosquito net.

    Dimensions of the box

    BoxHeight x WidthALU 37ALU 39ALU 45ALU 52PVC 37PVC 52
    RAK 137137 x 137 mm16001600115090017501000
    RAK 165165 x 165 mm239024701660159025501650
    RAK 180180 x 180 mm284030202210206032002150
    RAK 205205 x 205 mm4300348027003100


    RAS - adaptive standard shutters

    It is the most popular variant of adaptive roller shutters equipped with an inspection flap bent at 45º, opened from the outside, from the front of the box. Therefore, it cannot be plastered - the box is completely visible from the outside after installation. This variant allows to make the largest size shutters.

    Construction

    The RAS variant is available in six heights of 125 mm, 137 mm, 150 mm, 165 mm, 180 mm and 205 mm, of which 150 mm, 165 mm, 180 mm and 205 mm are also available with a roller mosquito net. Roller shutter drive output is possible in three locations A, B and C indicated in the drawings below, depending on the type of installation adopted. The height of the blind H is equal to the depth of the blind B.

    • The most popular system of adaptive bent sheet metal roller shutters.
    • The whole construction is made of Aluminum (box, sides, rails).
    • Revision at 45 degrees.
    • Designed for installation also in buildings with previously installed windows.
    • Wide range of RAL colors in the box elements.
    • Available lacquered wood colors: mahogany, walnut, golden oak.
    • Available box sizes: 125, 137, 150, 165, 180, 205 mm.
    • Possibility to use an integrated mosquito net.

    Dimensions of the box

    BoxHeight x WidthALU 37ALU 39ALU 45ALU 52PVC 37PVC 52
    RAS 125125 x 125 mm120012801250
    RAS 137137 x 137 mm16001600115090017501000
    RAS 150150 x 150 mm190019901250121022001250
    RAS 165165 x 165 mm239024701660159025501650
    RAS 180180 x 180 mm284030202210206032002150
    RAS 205205 x 205 mm4300348027003100


    RAR - Round-line adaptive shutters

    It is a variant of adaptive roller shutters equipped with a rounded inspection flap opening from the outside, from the front of the box and rounded overlays on the rails. Due to the decorative rounding of the inspection flap, it is not possible to plaster it - the box is completely visible from the outside.

    Construction

    The RAR variant is available in four heights of 137 mm, 165 mm, 180 mm and 205 mm, of which the boxes in heights 165 mm, 180 mm and 205 mm are also available with a roller mosquito net. Roller shutter drive output is possible in two places marked in the following drawings with the letters A and B, depending on the type of installation. The height of the blind H is equal to the depth of the blind B.

    • Adaptive bent sheet metal roller shutter system with rounded revision.
    • The whole construction is made of aluminum (box, sides, rails).
    • Designed for installation also in buildings with previously installed windows.
    • Wide range of RAL colors in the box elements.
    • Available box sizes: 137, 165, 180, 205 mm.
    • Possibility of using an integrated mosquito net.

    Dimensions of the box

    BoxHeight x WidthALU 37ALU 39ALU 45ALU 52PVC 37PVC 52
    RAR 137137 x 145 mm1520160088085017501000
    RAR 165165 x 173 mm250025102020164025501650
    RAR 180180 x 188 mm284032602480206032002150
    RAR 205205 x 215 mm4370353027003100


    Color of the box

    Choose any RAL color.


    Armour Color


    Cart

    Your shopping cart is empty

    Buy your first product