uPVC Sliding Doors smart-slide NEO

Brand: Aluplast

What you get

Excellent technical properties and ease of use
Maximum dimensions: 6000 x 2500 mm
The possibility to use glazing units up to 54 mm

Add to Compare

Specifications
Description
Colours
Pricelist
Files to download
Recently viewed products
Similar products

Specifications

Depth of the frame [mm]	154
Maximum thickness of the glazing unit [mm]	54
Profile thickness	Class A
Wind resistance	B3
Water resistance	7A
Acoustic insulation	34 - 45 dB
Air permeability	Class 4
Brand	Aluplast

Profile thickness

The walls of the window chambers have different thickness, which determines the class of the profile. The thickness of the profiles is defined by the PN-EN 12608: 2004 standard. Profiles can have three classes: A, B and C. This parameter specifies the wall thickness of the profiles. The Class A profiles have outer walls with a thickness of ≥ 2.8 mm. Class B ≥ 2.5 mm. The standard does not define any requirements for class C sections. Class A profiles are the best choice as they provide us with the best window insulation. However, while selecting the so- called “warm” windows, you should also pay attention to such elements as the number of chambers, gaskets, type of the fittings, warm edge spacer, and glazing unit.

Wind resistance

It is one of the most important properties of windows and doors. It determines the safety of the entire structure, as it indicates the amount of pressure caused by wind that the window or door structure is able to resist without serious damage. The classification of wind-resistant windows and doors is carried out in accordance with PN-EN 14351-1. The wind load resistance of the window is described by two symbols: the number (1-5) which indicates the pressure of wind applied to the product and the letter (A-C) which indicates the amount of accepted deflection.

Thickness of the glazing unit

A glazing unit is a structure consisting of two, three, or even four panes of glazing separated from each other by a distance frame, sealants and vapour-absorbing gas (argon \ krypton). The thickness of the glazing unit is the overall measurement, from the outside glass surface to the inside glass surface. The average double glazing thickness is about 24 mm while triple-glazed windows are 42 – 48 mm in thickness on average. The number of panes in a glazing unit affects the improvement of the U-value parameter

Water resistance

It is the capacity to avoid water leakages under wind and rain at the same time. Leakage is defined as the appearance of uncontrolled water (other than condensation) on the inner surface of the product. Obviously, the doors and windows with good waterproof performance can effectively prevent water from entering into their internal structure and – as a result – ensure a longer service life. The classification ranges from Class 0 (no test) to Class 7A for windows and Class 3A for doors.

Air permeability

It is the measurement showing how easily air can pass through a window or a door. The European Standard regarding air permeability in windows and doors is EN 12207. It classifies windows or doors according to their capability to prevent air travel through the system. This capability is measured on a scale, from Class 1 (less tightness) to Class 4 (higher tightness). A window or a door system with a higher level of air tightness is more energy-efficient, as less heated air escapes through it.

Acoustic insulation (Rw)

Acoustic insulation coefficient. It determines the insulation of the sliding doors against noise from the outside. The unit of measurement is decibels (dB). This parameter is influenced by: the thickness of the glazing in the glazing unit, the use of PVB laminated glass or the use of an acoustic foil.

Depth of the frame

A very important dimension, saying a lot about sliding doors quality and functionality. The depth affects the sound insulation, thermal insulation (U-value) and stiffness of the structure. To put it simply: the bigger the depth, the warmer the sliding doors.

Smart-slide NEO sliding patio doors are characterised by large dimensions of the structure, the possibility of using wider glazing units and the unique angular, cubist shape of the profiles. Large glazing will allow you to enjoy a panoramic view and create the impression of an open and spacious space. This sliding door system meets high thermal requirements and perfectly combines ease of use, reliability and top aesthetics all in one.

Smart-slide NEO patio doors are available in two opening schemes:

A – with one movable leaf;
C – with two leafs that slide sideways.

Smart-slide NEO:

Window frame installation depth: 154 mm
Installation depth of the sash: 78 mm
Maximum sliding system dimensions: 6000 x 2500 mm
Thickness of the glazing unit up to 54 mm
Large glass surfaces – a timeless interior design trend
The simple, symmetrical shape and installation of panes in narrow frames for better illumination of the rooms
The increased installation depth of the frame and sash allows the use of energy-saving glazing units
The innovative closing mechanism allows for simple and intuitive operation – thanks to specialist window fittings the unlocked sash moves freely and without the resistance to the unopened part of the structure
Locking points located on the post further enhance tightness and safety
Easy operation of the sliding door and gentle closing of the sash in the frame

Opening schemes

Scheme A

Scheme C

Colours

Standard colours

AP 01

AP 02

AP 05

AP 06

AP 11

AP 15

AP 19

AP 20

AP 21

AP 23

AP 25

AP 27

AP 28

AP 29

AP 30

AP 32

AP 34

AP 40

AP 41

AP 43

AP 44

AP 47

AP 50

AP 52

AP 60

AP 61

AP 62

AP 63

AP 65

AP 70

AP 71

AP 72

AP 75

AP 79

AP 88

AP 94

AP 95

AP 102

AP 103

AP 104

AP 105

AP 106

AP 107

AP 108

AP 109

AP 110

AP 111

AP 112

AP 113

AP 115

AP 116

Price list

The prices shown in the Price List are for white, double-glazed and/or triple-glazed products and do not include accessories or custom sizes and dimensions. Additionally, each colour change affects the final price of the product in the following way:

Aluminium windows and sliding systems:

The Customer pays 3-5% more for a one-sided coating or two-sided coating.

uPVC windows:

The Customer pays 10-20% more for a one-sided veneer and 25-35% more for a two-sided veneer.

uPVC sliding doors:

The Customer pays 5-10% more for a one-sided veneer and 10-15% more for a two-sided veneer.

The presented price offer is for information purposes only. If you want to know the detailed quote on your individual order, please contact our Sales Team. We will get back to you with the final price that is tailored to your specific needs – free of charge!

One active-leaf door

Size:	3000 x 2100
Double-glazed Price from:	€ 2097 net
Triple-glazed Price from:	€ 2670 net

One active-leaf door

Size:	4000 x 2100
Double-glazed Price from:	€ 3033 net
Triple-glazed Price from:	€ 3908 net

Files to download

Smart Slide Neo

Frequently Asked Questions

First of all, you should send us your enquiry where you specify your chosen joinery parameters, dimensions and qualities. In order to prepare a quote for you, we need the following details:

Model window/door (aluminium/uPVC) - [any specific U-value is required?]
Width x Height [mm]
Colour from internal/external side
Glazing: double/triple
Eircode (so we can check delivery cost)
Contact details, email address, phone number

In case you want the quote for installation services as well, let us know and specify whether you are interested in a new project or windows replacement. Next, we will provide the personalised quote for the purchase of joinery together with installation costs, delivery and lead-time. Please send all the information and enquiries about our offer to the following e-mail address: [email protected]

We are selling complex products, tailored services and our customers often require a special solution. That's why each of our products is personalised and we do not have the standard price list. Every product is quoted according to individual customer needs. Please send all enquiries about our offer to the following e-mail address: [email protected]

At the moment, the estimated lead time for specific product categories is as follows:

uPVC windows and doors, shutters: up to 7 weeks
Velux roof windows, blinds & accessories: up to 8 weeks
Aluminium windows, doors: up to 7 weeks
Steel doors: up to 8 weeks
Garage Doors: up to 7 weeks

Additionally, for every category, you have to count in 5 days for delivery time.

See all questions

uPVC Sliding Doors smart-slide NEO

Smart-slide NEO:

How it works

Frequently Asked Questions