uPVC Window IGLO 5 Classic

Brand: Drutex

What you get

Excellent thermal performance with a U-value as low as 0.86 W/m²K
Enhanced security with PAS 24 compliance
Acoustic insulation of up to 42 dB

Add to Compare

Specifications
Description
Colours
Recently viewed products
Similar products

Specifications

Maximum thickness of the glazing unit [mm]	40
Number of chambers	5
Opening direction	Inwards
U-value	0.86
Depth of the frame [mm]	70
Number of gaskets	2
Depth of the frame [mm]	93
Acoustic insulation	34–42 dB
Brand	Drutex

Opening direction

There are two window opening directions possible: inwards or outwards. When you want to determine the window opening direction, you have to stand at the side where you can see the hinges. If you are standing outside the building and the windows open towards you, these are outward-opening windows. If, on the other hand, you are standing inside the building and the windows open towards you, these are inward-opening windows.

Thickness of the glazing unit

A glazing unit is a structure consisting of two, three, or even four panes of glazing separated from each other by a distance frame, sealants and vapour-absorbing gas (argon \ krypton). The thickness of the glazing unit is the overall measurement, from the outside glass surface to the inside glass surface. The average double glazing thickness is about 24 mm while triple-glazed windows are 42 – 48 mm in thickness on average. The number of panes in a glazing unit affects the improvement of the U-value parameter

Number of chambers

The number of chambers in the window affects the thermal insulation of the window. The chambers keep air from circulating and in this way they create an additional insulating layer. Energy-saving (passive) windows most often come with a 6-chamber structure and a built-in depth of over 80 mm. Window chambers also increase the structural strength of a window and add to its overall stiffness

Number of gaskets

window gaskets prevent draughts and water from entering into your home. They are also a barrier for the outside noise and an effective way to keep warm air in – and thus, lower your energy bills. Two gaskets are necessary for the window to fulfil its function properly, while the central (third) gasket is not necessary. However, it has been proven that window structures with a central gasket are tighter, both in terms of air permeability and water-tightness, than structures without a middle gasket. Also, third gasket affects the improvement of the U-value parameter.

Uw (U-value)

The window’s heat transfer coefficient. It informs you about the level of window thermal insulation. The Uw (U- value) shows how much heat will penetrate 1 m2 of a window in one hour, with a difference between the temperatures on both sides of the window of one degree. This means that the lower the Uw coefficient, the better the window’s thermal insulation is.

Acoustic insulation (Rw)

Acoustic insulation coefficient. It determines the insulation of the window against noise from the outside. The unit of measurement is decibels (dB). This parameter is influenced by: the thickness of the glazing in the glazing unit, the use of PVB laminated glass or the use of an acoustic foil.

Depth of the frame

A very important dimension, saying a lot about window quality and functionality. The depth affects the sound insulation, thermal insulation (U-value) and stiffness of the structure. To put it simply: the bigger the depth, the warmer the window. In general, deeper window profiles also have more chambers. Standard depths: 5-chamber profiles: 70 mm, 6-chamber profiles: > 70 mm – 90 mm.

IGLO 5 Classic

IGLO 5 Classic is a proven five-chamber uPVC window system that combines good thermal performance with classic aesthetics and reliable everyday functionality. Its wide choice of finishes makes it easy to match the windows to various architectural styles. An additional advantage is that windows made from this material are easy to clean and maintain. The product meets PAS 24 requirements.

IGLO 5 Classic – benefits

Five-chamber Class A profile
70 mm installation depth
U-value as low as 0.86 W/m²K
Glazing units from 24 to 40 mm
Acoustic insulation from 34 to 42 dB
Compliant with PAS 24 requirements
Two durable EPDM gaskets
MACO MULTI-MATIC KS fittings with two anti-burglary strikers
Microventilation in tilt-and-turn windows
Argon-filled double glazing as standard
Optional Swisspacer Ultimate warm-edge spacer
Over 30 Renolit veneer colours

Colours

Standard colours

Dark Oak texture

Crown Platinum texture

Black Ulti Matt texture

Douglas Fir texture

Whitened Oak texture

Natural Oak texture

Bright grey texture

Jet Black texture

Cream texture

Mahoganny texture

Macore texture

Anthracite texture

Anthracite Ulti Matt texture

Anthracite Smooth texture

Basalt Grey texture

Basalt Grey Smooth texture

Splitt texture

Splitt grey smooth texture

Oregon texture

Walnut texture

Rosewood texture

Pyrite texture

Grey texture

Quarz grey texture

Quarz grey smooth texture

Turner Oak texture

Winchester texture

Moss green texture

Golden oak texture

Concrete Grey texture

White FX texture

Chocolate Brown texture

Dark green texture

Dark Grey texture

Rosewood

Cream

Jet Black

Bright Grey

Deep bronze

Black Ulti Matt

Quarz grey smooth

Quarz grey

Grey

Piryte

Moss green

Medium brown

Aludec umbra grey

Basalt grey

Anthracite smooth

Anthracite Ulti Matt

Anthracite

Crown platinum

Dark red

Dark green

Chocolate brown

White FX

Concrete grey

Douglas fir

Dark oak

Natural oak

Whitened oak

Macore

Mahoganny

Walnut

Oregon

Turner oak amber

Turner oak

Turner oak toffee

Winchester

Turner oak walnut

Golden oak

Frequently Asked Questions

First of all, you should send us your enquiry where you specify your chosen joinery parameters, dimensions and qualities. In order to prepare a quote for you, we need the following details:

Model window/door (aluminium/uPVC) - [any specific U-value is required?]
Width x Height [mm]
Colour from internal/external side
Glazing: double/triple
Eircode (so we can check delivery cost)
Contact details, email address, phone number

In case you want the quote for installation services as well, let us know and specify whether you are interested in a new project or windows replacement. Next, we will provide the personalised quote for the purchase of joinery together with installation costs, delivery and lead-time. Please send all the information and enquiries about our offer to the following e-mail address: [email protected]

We are selling complex products, tailored services and our customers often require a special solution. That's why each of our products is personalised and we do not have the standard price list. Every product is quoted according to individual customer needs. Please send all enquiries about our offer to the following e-mail address: [email protected]

At the moment, the estimated lead time for specific product categories is as follows:

uPVC windows and doors, shutters: up to 7 weeks
Velux roof windows, blinds & accessories: up to 8 weeks
Aluminium windows, doors: up to 7 weeks
Steel doors: up to 8 weeks
Garage Doors: up to 7 weeks

Additionally, for every category, you have to count in 5 days for delivery time.

See all questions

uPVC Window IGLO 5 Classic

IGLO 5 Classic

IGLO 5 Classic – benefits

How it works

Frequently Asked Questions