Sectional Garage Doors INFINITI R with torsion springs at the rear

The spring technologies used make the door fit perfectly into any garage opening. The location of the torsion springs in the rear part of the door allows it to be mounted to the garage opening with a lower lintel. The gate can be additionally equipped with a pass door on a low or high threshold, an aluminum section or glazings (in the uPVC frames).

Technical specification of the doors:

Maximum width: 5 m
Maximum height: 3m
Maximum weight: 195 kg
Minimum dimensions: 75 mm jambs, lintel: 85mm – manual opening, 115 mm – electric drive

Max. area of the door: 12.5 m²
Max. lintel height for standard hanging: 350 mm (above 350 mm lintel, installation with the use of angles supplied on request)
Min. building depth without the drive: height + 695 mm
Min. building depth with electric drive:

• for doors up to 2250 mm, height 3150 mm
• for doors up to 2750 mm, height 3750 mm
• for doors up to 3000 mm, height 4750 mm

Benefits:

• Made of the highest quality components, equipped with a reliable system of fastening and security.
• Anti-corrosive protection on both sides for retaining door appearance and functional properties for many years
• The use of eRSC70 torsion springs at the rear
• eRSC70 torsion springs are distinguished by a solid and durable structure, as well as safety of use
• The simplified assembly: fewer parts and pre-assembled components
• Torsion springs located in the rear part of the door allow it to be mounted to the garage opening with a lower lintel
• Type of drive: manual or automatic
• The sectional doors are available in many sizes and finishing options with a choice of surface embossing – the wide choice of accessories, including automatic drives, glazing, service doors and decorative accessories
• There are a lot of glazing options available: rectangles, squares, circles etc.
• Panels used to build sectional gates have a thickness of 40 mm – gaskets in guides and the core of the panel made from polyurethane foam ensure the highest level of thermal isolation in the gate
• Panels available with the following types of surfaces: smooth or stamped (low, high or Woodgrain ribbing)
• Veneer colours of panels are the same as the ones used on the Salamander, Aluplast and Gealan window profiles
• The panels are available in all the colours of the RAL palette